Date：2021-05-07 15:36:00

In the second quarter, chip shortage and price rise continued. In April, many chip manufacturers at home and abroad successively sent letters to raise prices and suspend orders. At the same time, wafer foundry also began a new round of price increases. Various signs show that the shortage of chips and the rise in prices are bound to reach a new height. The market in the "post epidemic era" is destined to be extraordinary. View >>

Date：2021-04-29 16:53:46

Electronic components are the smallest units of electronic circuits, among which resistance, capacitance, inductance, diode and triode are common components of electronic circuits. In the circuit, they are the objects that need to be detected and replaced in maintenance. Therefore, this paper briefly introduces the testing process and standards of electronic components. View >>

Date：2021-04-29 16:07:00

The quality of the inductor can be detected with a multimeter. As shown in the figure, place the multimeter in "R" × 1 "gear, the two probes (regardless of positive and negative) are connected with the two pins of the inductor, the indication of the probe should be close to" 0 Ω ", and the inductor with large inductance should have a certain resistance value. If the needle does not move, it indicates that the inductor is internally open; If the indication of the gauge needle is unstable, it indicates poor internal contact. View >>

Date：2021-04-29 15:09:00

Capacitance (or capacitance) refers to the charge storage under a given potential difference; Marked as C, the international unit is farad (f). Generally speaking, the charge will move under force in the electric field. When there is a medium between the conductors, it hinders the charge movement and makes the charge accumulate on the conductor; The most common example of cumulative charge storage is two parallel metal plates. It is also commonly known as capacitor. View >>

Date：2021-04-29 14:23:00

As a worker in the electronics industry, resistance is well known. There is no doubt about its importance. It is said that "resistance is the most used component in all electronic circuits." Resistance, because the substance hinders the current, it is called the resistive substance under this action. Resistance will lead to the change of electron flow. The smaller the resistance, the greater the electron flow, and vice versa. A substance with no or little resistance is called an electrical conductor, or conductor for short. View >>

Date：2021-04-28 17:49:28

The detection of components is an essential basic work. How to accurately and effectively detect the relevant parameters of components and judge whether the components are normal. The test to measure, verify or improve product reliability is called reliability test. It is an important link of product reliability. In most cases, what reliability test items need to be tested? Let's take a look. View >>

Date：2021-04-28 17:26:00

At present, China's electronic processing industry is developing rapidly. At the same time, the market has higher and higher requirements for the quality of electronic products. Especially in circuit assembly, higher specifications are put forward for detection methods and technologies. The detection of components is an essential basic work. Different methods must be adopted according to different components to judge whether the components are normal or not. So what tests should be done to test the quality of electronic components? Let's have a look! View >>

Date：2021-04-27 16:04:37

The failure of semiconductor devices is usually due to the stress generated exceeding their maximum rating. Electrical stress, thermal stress, chemical stress, radiation stress, mechanical stress and other factors will cause device failure. Device failure will exist in the whole life cycle of the product. If there is no collection of failure information and failed devices in each stage, the failure analysis will lose the necessary "material" basis. Therefore, to carry out failure analysis, we must first establish the collection system of failure information and failed devices in the stages of development, production and engineering. The following is a summary and analysis of the five main reasons for the failure of semiconductor components! View >>

Date：2021-04-27 15:57:00

With the continuous improvement of people's requirements for product quality and reliability, failure analysis is becoming more and more important. In recent years, it has been popularized from military industry to ordinary enterprises. It is generally based on the failure mode and phenomenon, through analysis and verification, simulate and reproduce the failure phenomenon, find out the cause of failure, and dig out the failure mechanism. View >>

Date：2021-04-27 15:53:00

X-ray uses the cathode ray tube to produce high-energy electrons to collide with the metal target. In the process of impact, due to the sudden deceleration of electrons, the lost kinetic energy will be released in the form of X-ray. It is convenient to analyze the internal cracks and foreign matter defect detection of metal materials and parts, plastic materials and parts, electronic components, electronic components and LED components, as well as the internal displacement analysis of BGA and circuit board; Identify BGA welding defects such as empty welding and false welding, microelectronic system and adhesive sealing components, cables, fittings, internal conditions of plastic parts, etc. Counterfeit products appear in almost every industry. The problem of component counterfeiting is common, and has penetrated into the whole electronic component supply chain. Equipment manufacturers need to establish a strong defense system. View >>