Standards for electrical performance of electronic products: what does electrical performance test mainly include?

Date：2021-10-28 16:57:26Views：1626

In the international standard classification, electrical performance involves batteries and batteries, metal material testing, solar engineering, aerospace systems and operating devices, wireless communication, trams, electronic tubes, transformers, reactors, inductors, insulating materials, nondestructive testing, electrical devices, wires and cables, components and accessories for telecommunications equipment, audio, video and audio-visual engineering Integrated electronic components, agriculture and forestry, capacitors, insulation, kitchen equipment, piezoelectric and dielectric components for frequency control and selection, integrated circuits, microelectronics, ceramics, road vehicle devices, protective equipment, refrigeration technology, electricity, magnetism, electrical and magnetic measurement, textile products, floor non-woven fabrics, adhesives and adhesive products, semiconductor discrete devices Electric lamps and related devices, interface and interconnection equipment, electronic display devices, road vehicle internal combustion engines, telecommunications systems, electrical equipment components, filters, microprocessor systems, printed circuits and printed circuit boards, telecommunications terminal equipment, continuous handling equipment, switchgear and controllers, vocabulary, insulating fluids.

The electrical performance test includes the basic parameter test of conductor or insulation quality, such as conductor resistance, insulation resistance, correct value of dielectric loss angle, capacitance, etc. The higher the working voltage of the cable, the stricter the requirements for its electrical performance.

（1） DC resistance test of conductive core

The resistance of the cable of each nominal section shall not exceed a certain value, otherwise it will increase the core loss of the cable during use, resulting in cable heating, which will not only consume material and electric energy, accelerate the aging of plastic cable, but also bring danger to the reliability and stability of cable operation.

At present, double arm measuring bridge is commonly used.

（2） Insulation resistance test

The ratio of DC voltage U applied to insulation to leakage current I is called insulation resistance R. the insulation resistance of cable is mainly to judge the humidity and insulation quality of cable insulation layer.

Industry standard - Electronics, standards on electrical performance

SJ / T 11157-1998 measurement methods for television broadcast receivers Part 2: electrical performance measurement of sound channels, general measurement methods and mono measurement methods

SJ 20580-1996 measurement method of electrical performance of communication system

SJ 20566-1996 measurement method of electromechanical performance of low frequency / very low frequency transmitter

SJ / T 10612.2-1995 30MHz ~ 1GHz sound and television broadcasting receiving antenna Part 2: measurement methods of electrical performance parameters

SJ / T 10640-1995 test method for electrical performance of piezoelectric filters

SJ 20408-1994 measurement method of electrical performance of UHF digital relay equipment

SJ / T 1145-1993 general rules for test methods of electrical properties of organic films for capacitors

SJ / T 10391-1993 test method for electrical performance of inflatable regulator

SJ 20367-1993 electrical performance measurement method for 64kbit / s time division multiplexing equipment

SJ 3260-1989 test method for electrical performance of tuning fork and sound film resonator

SJ 2552-1984 measurement method of electrical performance of 32Kbit / s, 64kbit / s Telegraph and data transmission time division multiplexing equipment (Provisional)

SJ 2487-1984 measurement method of electrical performance of very high frequency (VHF) television and FM broadcasting receiving antenna

SJ / T 2429-1983 test method for electrical performance of space monocrystalline silicon solar cells

SJ 2332-1983 measurement method of electrical performance of transmission equipment in digital radio microwave relay communication channel

SJ / T 2196-1982 test method for electrical performance of ground silicon solar cells

SJ / T 10864-1996 test method for electrical properties of disk sealed tubes - General

SJ / Z 9010.22-1987 test of electrical properties of electronic tubes Part 22: Test methods for cold cathode counter tubes and display tubes

SJ / Z 9008.8-1987 test of electrical properties of microwave electron tubes Part 9: orthogonal field amplifier tubes

SJ / Z 9010.18-1987 test of electrical properties of electronic tubes Part 18: Test Method for noise caused by mechanical or acoustic excitation

SJ / T 31165-1994 integrity requirements and inspection and evaluation methods of power supply for electrical performance test of power traveling wave tube

SJ / T 31162-1994 integrity requirements and inspection and evaluation methods of continuous wave magnetron electrical performance test power supply

SJ / Z 9010.1-1987 test of electrical properties of electronic tubes Part 1: Test of electrode current

SJ / T 10869-1996 test method for electrical performance of disk sealed tubes test method for power gain

SJ / Z 9010.13-1987 test of electrical properties of electron tubes Part 13: Test Method of hot cathode emission current of high vacuum electron tubes

SJ / Z 9010.21-1987 test of electrical properties of electronic tubes Part 21: Test Method of cross modulation of electronic tubes

SJ / Z 9010.10-1987 test of electrical properties of electronic tubes Part 10: Test Method of audio output power and distortion

SJ / Z 9008.6-1987 test of electrical properties of microwave electronic tubes Part 7: gas filled microwave switching tubes

SJ / T 31169-1994 integrity requirements and inspection and evaluation methods of power supply for dynamic electrical performance test of hydrogen thyristor

SJ / T 10865-1996 test method for electrical performance of disk sealed tubes test method for frequency response characteristics

SJ / Z 9010.17-1987 test of electrical properties of electronic tubes Part 17: Test Method of inflatable tubes

SJ / Z 9010.2-1987 test of electrical properties of electronic tubes Part 2: Test of hot filament or filament current

SJ / Z 9010.16-1987 test of electrical properties of electronic tubes Part 16: Test methods for television picture tubes

SJ / Z 9010.27-1987 test of electrical properties of electronic tubes Part 27: Test Method of mutual modulation components in transmitting tubes

SJ / Z 9010.14-1987 test of electrical properties of electronic tubes Part 14: Test methods for radar and oscillographic cathode ray tubes

SJ / Z 9010.11-1987 test of electrical properties of electronic tubes Part 11: Test Method of RF output power

SJ / Z 9010.12-1987 test of electrical properties of electronic tubes Part 12: Test methods for electrode resistance, transconductance, amplification factor, variable frequency resistance and variable frequency transconductance

SJ / Z 9010.24-1987 test of electrical properties of electronic tubes Part 24: Test methods for cathode ray charge storage tubes

SJ / Z 9010.19-1987 test of electrical properties of electronic tubes Part 19: Test Method of corona stabilizer

SJ / Z 9010.8-1987 test of electrical properties of electronic tubes Part 8: Test of cathode heating time and hot wire heating time

SJ / Z 9010.4-1987 test of electrical properties of electronic tubes Part 4: Test Method of noise figure

SJ / Z 9010.26-1987 test of electrical properties of electronic tubes Part 26: Test methods of camera tubes

SJ / T 31164-1994 integrity requirements and inspection and evaluation methods of power supply for electrical performance test of power governor

SJ / T 11148.2-1998 VCD video disc machine test disc electrical performance test disc (in kind)

SJ / Z 9010.15-1987 test of electrical properties of electronic tubes Part 15: Test Method of parasitic and unnecessary electrode current

SJ / T 10866-1996 test method for electrical performance of disk seal pipe test method for frequency position

SJ / Z 9010.0-1987 test of electrical properties of electronic tubes Part 0: precautions related to test methods of electronic tubes

SJ / Z 9008.7-1987 test of electrical properties of microwave electronic tubes Part 8: O-type backward wave oscillator

SJ / Z 9010.6-1987 test of electrical properties of electronic tubes Part 6: method of mechanical impact on electronic tubes

SJ / Z 9010.7-1987 test of electrical properties of electronic tubes Part 7: Test of equivalent noise resistance

SJ / T 10868-1996 test method for electrical performance of disk sealed tubes test method for self neutralization frequency

SJ / Z 9010.20-1987 test of electrical properties of electronic tubes Part 20: Test Method of thyristor pulse modulator

SJ / Z 9008.5-1987 test of electrical properties of microwave electronic tubes Part 6: high power klystron

SJ / Z 9010.5-1987 test of electrical properties of electronic tubes Part 5: Test of howling and humming

SJ / Z 9008.3-1987 test of electrical properties of microwave electronic tubes Part 4: magnetron

SJ / T 10871-1996 test method for electrical performance of disk sealed tubes test method for three tone intermodulation distortion

SJ / T 11061-1996 test method for electrical performance test equipment of solar cells

SJ / Z 9008.4-1987 test of electrical properties of microwave electronic tubes Part 5: low power oscillating klystron

SJ / T 31167-1994 integrity requirements and inspection and evaluation methods of power supply for dynamic electrical performance test of inflatable microwave switch tube

SJ / Z 9010.25-1987 test of electrical properties of electronic tubes Part 25: Test Method of gaimiao counter

SJ / T 11202.1-1999 super VCD video disc electromechanical performance test disc (physical standard)

SJ / Z 9008.1-1987 test of electrical properties of microwave electronic tubes Part 1: Terminology

SJ / Z 9010.28-1987 test of electrical properties of electronic tubes Part 28: Test methods for color TV picture tubes

SJ / Z 9010.23-1987 test of electrical properties of electronic tubes Part 23: Test Method of vacuum pulse modulation tubes

SJ / T 10867-1996 test method for electrical performance of disk sealed tubes test method for unloaded quality factor Q of resonant cavity

SJ / Z 9010.9-1987 test of electrical properties of electronic tubes Part 9: Test of cathode interlayer impedance

SJ / T 10870-1996 test method for electrical performance of coiled tubing test method for amplitude and phase modulation conversion coefficient

SJ / T 31168-1994 integrity requirements and inspection and evaluation methods of power supply for electrical performance test of transmitting tube

SJ / Z 9010.3-1987 test of electrical properties of electronic tubes Part 3: Test of equivalent input and output admittance

SJ / Z 9008.2-1987 test of electrical properties of microwave electronic tubes Part 2: General test

SJ / T 31163-1994 voltage tuned magnetron electrical performance test power supply integrity requirements and inspection and evaluation methods