RoHS2. When will 0 be implemented? RoHS2. 0 effective date and enforcement date

Date：2021-09-13 15:52:00Views：2183

With the rapid growth of electronic and electrical equipment, a large number of electronic waste is also increasing rapidly. In order to control the pollution of electronic and electrical waste to the ecological environment, different countries or regions have promulgated relevant laws and regulations to control it. Among them, the EU directive rohs2 on the restriction of 10 categories of hazardous substances in motor and electronic products 0. From July 22, 2019, all electronic and electrical products exported to Europe (except medical and monitoring equipment) shall meet this restriction. RoHS is the environmental protection certificate for products and materials entering the EU market. This directive is a mandatory requirement. Products or materials involved in this directive will not be able to enter the market without ROHS environmental protection certificate. RoHS2. The implementation of 0 is related to the interests of electronic and electrical appliance manufacturers exporting to the EU, so let's have a look today!

RoHS was adopted by the European Parliament and the European Council in January 2003, also known as Directive 2002 / 95 / EC. RoHS was revised twice in 2005 and 2011, upgraded to RoHS 2.0, 6 items of the original test were upgraded to 10 items, and the transition period was specified.

June 2015: the EU issued directive (EU) 2015 / 863 in its official gazette to amend Annex II of RoHS 2.0 (2011 / 65 / EU), and officially listed four phthalates (DEHP, BBP, DBP and DiBP) in Annex II of RoHS 2.0. So far, there are ten restricted substances in Appendix II. This amendment shall enter into force on the 20th day after the announcement in the EU Gazette, and each member state shall translate the directive into its own decree before December 31, 2016.

EU rohs2 0 directive enforcement date, EU ROHS directive 2.0 (2011 / 65 / EU) officially entered into force on July 21, 2011, replacing the previous version 2002 / 95 / EC. On June 4, 2015, four amendments (EU) 2015 / 863 of orthobenzene were officially included in the restriction list of RoHS 2.0 directive.

The following 10 restricted substances will come into effect on July 22, 2019 (ROHS test items and regulations require that the content in each homogeneous material shall not exceed the following limits):

1) Lead (PB): < 1000 ppm

Lead is commonly used in solders, lead-acid batteries, electronic components, cable sheaths and cathode ray tube glass in the electrical and electronic industry.

2) Mercury (Hg): < 100 ppm

Mercury is a metal widely used in the production of electrical and electronic equipment, mainly in batteries, switches and thermostats and fluorescent lamps.

3) Cadmium (CD): < 100ppm

Cadmium is used in electronic equipment, automotive batteries and pigments.

4) Hexavalent chromium (CR VI) < 1000ppm

Although some forms of chromium are non-toxic, hexavalent chromium can have toxic effects.

5) Polybrominated biphenyls (PBB): 1000ppm

These are flame retardants in electronics and electrical appliances. They are found in indoor dust and air through plastic evaporation.

6) Polybrominated diphenyl ether (PBDE): < 1000 ppm

These are also flame retardants in electronics and electrical appliances. The burning of printed circuit boards releases toxic substances.

7) Di (2-ethylhexyl) phthalate (DEHP): < 1000ppm

These are used to soften PVC and vinyl insulation on wires.

8) Benzyl phthalate (BBP): < 1000ppm

These are used to soften PVC and vinyl insulation on wires.

9) Dibutyl phthalate (DBP): < 1000ppm

These are used to soften PVC and vinyl insulation on wires.

10) Diisobutyl phthalate (DiBP): < 1000ppm

These are used to soften PVC and vinyl insulation on wires.

Implementation date of four new phthalate control:

Considering that it takes some time for enterprises to meet the new requirements for hazardous substances, the corresponding transition period is specified in (EU) 2015 / 863:

l) From July 22, 2019, all electronic and electrical products exported to Europe (except medical and monitoring equipment) shall meet this restriction;

2) From July 22, 2021, medical equipment (including in vitro medical equipment) and monitoring equipment (including industrial monitoring equipment) will also be included in the control scope.

In addition, for toy products belonging to electronic and electrical categories, the contents of DEHP, BBP and DBP still need to be controlled in accordance with the requirements of annex x VII of REACH regulations.

The ROHS certification of the EU is to control the harmful substances in products, such as lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers. Among them, the city of lead, mercury, cadmium and hexavalent chromium tests the metals in products. Polybrominated biphenyls and polybrominated diphenyl ethers are the tests of plastics in products, which need to split and scan the materials of products, ROHS certification is very suitable for people's real life. Only when our products become safe, our health and environment will be protected.