Inspection process and standard of "must see" electronic components (attached figure)

Date：2021-04-29 16:53:46Views：2106

Electronic components are the smallest units of electronic circuits, among which resistance, capacitance, inductance, diode and triode are common components of electronic circuits. In the circuit, they are the objects that need to be detected and replaced in maintenance. Therefore, this paper briefly introduces the testing process and standards of electronic components.

Handle the inspection process of electronic components:

1. Project application - submit an application to the inspection authority.

2. Data preparation - the enterprise shall prepare relevant certification documents as required.

3. Product testing - the enterprise sends the samples to be tested to the laboratory for testing.

4. Preparation of report - the certification engineer prepares the report according to the qualified test data.

5. Submit for review - the engineer will review the complete report.

6. Issue certificate - issue the certificate after the report is reviewed and found to be correct.

A large number of various types of electronic components are used in electronic equipment. Most of the equipment failures are caused by the failure or damage of electronic components. Therefore, it is important for electronic components to meet the testing standards.

The inspection standard of electronic components is shown in the figure: